4 Pcs 433MHz TPMS Tire Pressure Monitoring Sensors Compatible with Chevy Cadillac Buick GMC, Replaces 13598773 13516165

Product Description We specialize in manufacturing high-quality automotive replacement parts, focusing on reliable tire pressure monitoring components. Every item undergoes strict quality inspection and 100% testing before shipment to ensure stable performance and safety.Compatibility Note Please confirm interchange part numbers and fitment before replacement.Specifications Battery Life: ≥ 5 years Operating Temperature: -40°C to +120°C Pressure Monitoring Range: 100 – 900 kPa Frequency: 433 MHz Installation Type: Snap-in Package Quantity: 4 PCSReplacement Part Numbers 13598773, 13516165, 13512347, 13595873How to Install the TPMS SensorTire Removal Lift the vehicle, remove the wheel, take out the valve core to release air completely, then demount the tire.Remove Old Sensor Fix the wheel on a tire changer and position the valve at the 1 o’clock direction. Remove the fixing screw to detach the sensor, loosen the nut, and take out the valve stem.Mount New Sensor & Valve Insert the valve stem through the rim hole. Tighten the nut to 4.0 Nm with a positioning pin. Attach the sensor closely to the rim and fasten the screw securely.Reinstall Tire Fit the tire onto the rim with the valve facing 180° away from the machine head. Inflate the tire properly and balance the wheel before installation.Sensor Removal StepsRemove the fastening screw and separate the sensor from the valve stem.Pull out the old valve stem with a standard tool; use a rubber cushion to protect the rim from damage.Sensor Installation StepsFeed the new assembly through the rim hole, keeping the flat side toward the rim.Pull the valve straight into place slowly to avoid scratching the rim or damaging the sensor.Registration InstructionsAfter installation, register new sensor IDs via the OBDⅡ port, set standard alarm pressure following official service procedures, and complete system testing.Recheck installation steps and retest if the system does not function normally.OBD Relearn Procedure A universal TPMS activation tool is required.Ensure sensors are correctly installed.Adjust tire pressure to factory standard values.Activate each sensor one by one near every valve stem.Connect the OBD connector to the vehicle port.Turn ignition to ON mode.Transfer sensor data to the vehicle control unit.Disconnect the OBD connector.Restart the vehicle.Drive above 28 mph for at least 5 minutes to finish matching.

• 【Pre-programmed TPMS Sensor】The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool. The specific operation is as follows Step 1: Select “Check Sensor” in TPMS scan tool. Step 2-4: Select vehicle brand,model and year. Step 5: Select tire location then push button to trigger . Step 6: Wake up sensor successfully and display sensor information on screen.
• 【APPLICATION】Compatible for Buick:Enclave,Encore GX,LaCrosse,Regal/Cadillac:XT4,XT5,XT6,CT6/Chevrolet:Blazer,Camaro,Cruze,Impala,Malibu,Silverado,TrailBlaze,Traverse,Volt/GMC :Acadia,Sierra
• 【REPLACE PART NUMBER】 13598771,13512347,13516165
• 【NO SENSOR PROGRAMMING REQUIRED 】The tire pressure monitor system (TPMS) come pre-programmed specifically for your make/model/year of vehicle,just need activate them with scan tool.
• 【HIGH QUANLITY】High performance Cr2032 battery and 900kpa chip.Battery is made to last up to 5-8 years of normal use,and can withstand 40 degrees low temperature,125 degrees high temperature.
• 【GOOD SERVICE】One year warranty.Our commitment to you is total and we want you to always be 100% satisfied by the quality and efficiency of our service.